Step By Step
WiFi Decoder User Manual/Instructions

How to Easily Crack, Decode, Hack or Recover WiFi Passwords with WiFi Decoder

 

1.      Install the driver using the driver CD and plug in WiFi Decoder using the USB cable included.

 

2.      Right click on Signal Bar icon on the lower right of your screen and select Open Config Utility.

3.      You should be able to receive many WiFi connections as WiFi Decoder is a powerful WiFi Adapter that can receive signals up to 2km in open space! You can just directly connect to any unsecured connections available. Note the WEP Connections with stronger signals you want to decode.

 

4.      For the WEP Secured connections, the Decoding software is needed to decode the passwords. Put the Decoder Software DVD in the DVD drive and restart the computer, the system will automatically boot from the DVD drive. (You may have to use setup to reconfigure the DVD Drive as default boot drive for some computers). There is no need to install the software into your PC.



 

5.      Select the first item on the list by pressing Enter. Type Startx at the root@bt:~# prompt and press <ENTER>



 

6.      Click on the SPOONWEP icon. You may have to change the screen resolution if you cannot see the icons or the lower toolbar.



 

7.       Select:

NETCARD: WLAN0
DRIVER: NORMAL
MODE: UNKNOWN VICTIM
Click <NEXT>


 

8.       Select CHAN HOPPING (Default) and Click <LAUNCH>




 

9.      Select a connection with DATA number more than ZERO. And click <SELECTION OK>.




 

10.  Click <LAUNCH> and wait. It will start to DECODE when 10,000 or more IVS are collected.  It will display the WEP Password when found. It can take anytime from 5 minutes to a few hours. Please be patient as it can take a long time if the connection is not actively in use. Just remove the colons (:) from the WEP keys found.
In this case: 1A2B3C4D5E










 

11.  To exit the BT4 just Right Click on screen and select Root Then Click <LOG OFF> and type <reboot> and press <ENTER>  twice. Press the eject button on your CD Drive and remove the BT4 DVD when computer is rebooting.





 

Just select the Connection you have just decoded and enter the WEP key and start surfing the net for free!

Thank you for buying and using the WiFi Decoder. If you have any questions or feedback, please email us at wifidecoder@gmail.com.  For further detail please visit www.wifidecoder.com.